Gusmer Brewing Catalog 2022-23

View Table of Contents

View Table of Contents

Filtration For Hard Seltzer Carbac ® Carbon Filter Media

Gusmer Enterprises’ Cellu-Stacks are a convenient way to utilize depth filtration media in an enclosed system. Offered in many Gusmer media grades, these stack filters can be used for coarse, fine and presterile filtration in numerous filtration applications. • Full range of filter media grades with high adsorptive and retention properties • Clean and safe filtration method when dealing with elevated pressures, temperatures, etc. • Convenient operation with short setup or changeover times • Small process footprint • Designed to conform with GMP • Highly economical with minimal maintenance and low operating costs • Protection of filtrate against spoilage in an enclosed depth filtration system Gusmer Enterprises Cellu-Stack ® Filters

HARD SELTZER

Carbac carbon impregnated lter media is an excellent solution to the hassle and mess of working with loose, powdered carbons. A composite of the nest charge- modi ed cellulose pulps, premium activated powdered carbon and inorganic lter aids, the Carbac media has been formulated specifically for its ability to adsorb color, aroma and flavor compounds for hard seltzers. It is an excellent tool for the nal color, avor adjustments and complete color removal in hard seltzer. The Carbac carbon impregnated lter media is available to fit any size plate filter press or in a lenticular cartridge form. Benefits • Clean and convenient reduction in color, flavor and aroma with consistent results • A fixed bed of carbon provides improved efficiencies over the use of loose powdered carbon • Manufactured under strict quality control guidelines to ensure uniform and consistent performance • Can meet the needs of specific applications through a variety of grades • Available in a sheet or a Cellu-Stack ® lenticular cartridge format • Grade selection and process optimization support is available through Gusmer’s application laboratories

Stack Specifications

176 o F (80 o C)

Max. Operating Temp. Steam in Place - 3 cycles Max. Differential Pressure Recommended Rinse Volume

253 o F (123 o C)

Contact your Gusmer representative for the optimal grade selection for your filtration application.

30 psid (2.1 bar)

Grades Description 1640HCX** Available Grades

2.5 gal/ft 2 (100L/m 2 )

Chemically activated wood; ideal for flavor, odor and color removal.

Gusmer Enterprises Cellu-Stack ® Housings Gusmer Enterprises also offers a complete line of Cellu-Stack filter housings designed as a cost-effective system for high capacity liquid filtration applications. The versatile sanitary housing line accommodates either 12” or 16” diameter Cellu-Stack filter cartridges with the effective filtration surface area ranging from 17.7 ft 2 - 152 ft 2 . All housings are available in 1, 2, 3, or 4-cartridge versions, which can be modified with the use of Cellu-Stack adapters to accept fewer cartridges for partial batch runs or other applications requiring fewer cartridges. ASME stamped housings are also available if required. Cellu-Stack Application Notes:

1640CRX* Chemically activated pine-wood; especially suited for decolorization. 1640CRM**

*Available in sheet form only **Available in sheet or Cellu-Stack® con gurations

Sheet Properties

Grade Designation

Thickness (mm)

Mass per unit Area (gsm)

1640HCX 1640CRX 1640CRM

4.20 3.95 6.10

1300

990

1400

Note: Test results are typical.

• P lace a quick acting check valve at the housing outlet to avoid integrity breaches that can be caused by backpressure • Double check that all cartridge gaskets are in place and in good condition to ensure optimal sealing • If filter life is not fully exhausted by a single filtration, DO NOT remove used filters from the housing for storage between uses. Instead, used filters can be stored IN the housing by following these steps: - Shut Down: After completion of the filtration cycle, sanitize the filters with the same method used to prepare the filters (i.e. steam or hot water flush) - Storage: Drain the housing, apply 2 psi gas pressure (i.e. CO 2 , nitrogen) while the housing is still warm (to avoid a vacuum upon cooling) and close all ports - Restart: When restarting for another filtration cycle, repeat the sanitization procedure just as you would for normal filter preparation

Adsorption Capacity

Mean Pore Size

250

2

200

1.5

150

1

100

0.5

50

0

0

1640HCX

1640CRX

1640CRM

1640 CRM 1640 CRX 1640HCX Standard Carbac Grades

Standard Carbac Grades

Challenged with 50 mg/liter methylene blue @ 46 liters/min/sq m. media

28 2022 - 2023 Gusmer Enterprises, Inc. Brewing Products Catalog

West Coast: 559.485.2692 / East Coast: 908.301.1811 www.gusmerbeer.com 29

Powered by