Gusmer Wine Catalog 2026-27

View Table of Contents

View Table of Contents

Application Notes for Sheet Filter Presses Operation T ypically, a filter press consists of a series of plates

Gusmer Enterprises Cellupore CSF Sheet Series

Superior Performance & Throughput Capacity Gusmer Enterprises’ Color Sensitive Filter (CSF) series is manufactured using advanced technologies that allow less initial color stripping during filtration, yet offers the same outstanding performance of conventional filter sheet media. Gusmer’s CSF gradient density sheets are a composite of the finest cellulose pulps and filter aids. • Excellent retention capabilities while preserving color, aromas, and flavors in beverages • Remove gross solids, haze constituents, yeast, bacteria, and colloids • Offered in 5 grades to cover coarse through pre-membrane filtration applications

Troubleshooting As with other separation and filtration equipment, regular cleaning, maintenance, and inspections should be conducted on filter presses. Some common issues and resolutions are listed below.

equipped with inlet and outlet ports. Depending on the type of press, the ports may be internally or externally ported. When the press is closed and tightened through manual or hydraulic means, the plates, gasketed ports, and sheets are closed to form a tight seal for feed and filtrate passage. The unfiltered product passes through the inlet ports of the plate to the depth filter sheet. The depth filter sheet separates the undesired contaminant and allows the cleaned product to flow to the outlet plate. The outlet plate distributes the • Very versatile - full range of wine filtration applications • L arge filter area and additional surface area available with more plates • F lexible, modular design with ability to conduct two-stage filtrations • G ood process scalability from bench to production scale • Consistent and reliable filtration results • Low maintenance costs cleaned product to the discharge or outlet port. Advantages of Filter Presses

Potential Issue or Concern Worn gaskets at inlet or outlet plates

Result

Resolution

Product loss

Replace gaskets. Use supplier information for proper thickness.

Color Stripping Challenge= Bourbon (0.164abs @ 525nm), Flow Rate - 16gal/hr/ft 2

0.18

Insufficient press

Product loss

Properly tighten press with manual or hydraulic closure. Use of leverage bar may be needed.

0.16

clamping

0.14

0.12

Missing guide rods Product loss

Manually align sheets. Purchase replacement guide rods. Depth filter sheets may be placed in wrong direction. Place cockled or rough side of filter towards the inlet plate. Align sheet parallel with plate.

0.1

0.08

CSF-SP (0.158 ABS)

Competitor (0.14 ABS)

Misaligned filter

Lower throughput, product losses

0.06

1

2 3 4 5 6 7 8 9 101112131415

16 17 18 19 20 21 22 23 24 25 26 27 28 29 30

sheets

Time (min)

Application Guide The information in this Application Guide is provided as a recommendation.

Recommended Flow Rates gal/hr/ft 2 (liter/hr/m 2 )

Maximum Flow Rates gal/hr/ft 2 (liter/hr/m 2 )

Maximum Differential Pressure (psid)

Filtration Type

Filter Grades

Possible Applications

High pressure/

Less efficient filtration

Ensure consistent product

excessive flow rates (premature blinding,

flow at recommended less retention, contaminant flow rate and differential break-through, product loss) pressure for filter grade.

Arrest Fermentation, Gross Clarification, Fining Agent Removal, Bioreduction High Degree of Clarification, Fining Agent Removal, Bioreduction High Degree of Clarification, Bioreduction, Membrane Filtration Preparation

24 - 32 (978 - 1304)

30 - 40 (1222- 1630)

45

CSF-XC (extra coarse) CSF-SC (standard coarse)

Coarse Filtration

Filter Press Flow Diagram (top view)

8 - 24 (326 - 978)

20 - 30 (815 - 1222)

Polish / Clarifying Filtration

45

CSF-SP (standard polish)

Outlet Plates

Outlet

BioReduction / Pre-membrane Filtration

Port

3 - 12 (122 - 489)

10 - 15 (407 - 611)

CSF-SF (standard fine) CSF-UF (ultra fine)

21

Stationary stainless steel plate

Sliding stainless steel plate

5.0

7.0

643

600

6.0

5.0

450

4.0

300

1.5

3.0

199

Inlet

2.0

Port

150

95

0.70

1.0

0.45

44

0.35

30

Head plate

Inlet Plates

Head plate

0

0

CSF-UF

CSF-SF

CSF-SP

CSF-SC

CSF-XC

CSF-UF

CSF-SF

CSF-SP

CSF-SC

CSF-XC

Filter Sheets

Filter Sheets

Filter Grades

Filter Grades

24 2026 - 2027 Gusmer Enterprises, Inc. Wine Products Catalog

25 Order Info: cs@gusmerenterprises.com | 866.213.1131 | www.GusmerWine.com

Powered by