Gusmer Distilling Catalog 2020-21

View Table of Contents MilliporeSigma Cartridge Filtration

Sterile Filtration Applications - Vitipore ® II and Vitipore ® II Plus Constructed with polyvinylidene fluoride (PVDF) membrane, the Vitipore II and Vitipore II Plus cartridges have been engineered to meet the rigorous and varied conditions of distilling filtration, sterilization and cleaning regimens. MilliporeSigma’s sterile membrane filters have a solid reputation for high flow rates and long service life, with a very low affinity for protein and pigment binding. No other cartridge gives as much throughput as the Vitipore II Plus. Available in 0.22 μm, 0.45 μm, 0.65 μm and 1.0 μm (absolute) pore sizes. Depth and Nominal Cartridge Filtration – Bevigard ™ M and Polygard ® CR MilliporeSigma’s dual-layer 1.2 μm over 0.5 μm Bevigard M prefilter offers either the tightest protection of sterile membrane filters or an incredibly retentive cartridge for final filtrations that only require particle removal or microbial reduction and not microbial sterility. The Polygard CR is a wrapped cartridge that offers an efficient combination of high dirt holding capacity and high retention. The high dirt loading capacity of the Polygard CR makes it a reliable trap filter for DE or carbon fines in distilleries. The Polygard CR is available in pore size ratings up to 100 μm. Clarification filters are an ideal bottling filter when sterile filtration is not required. MilliporeSigma has dozens of other prefiltration and clarification cartridges that can be matched to specific distilling applications.

MilliporeSigma Bevliner Filter Housings

MilliporeSigma’s Bevliner T-line configured filter housings are economical, high quality, sanitary housings used throughout the beverage industry. Bevliner housings are available in the appropriate size for any application and are both CE and ASME compliant, meeting all design and manufacturing standards. Each Bevliner housing comes complete with a sight glass assembly including two vent valves and dual-scale pressure gauge, support legs, ball valve, tri-clamp end cap and the required clamps and gaskets for the included accessories. Please inquire about choosing the right MilliporeSigma Bevliner housing for your application. Materials of Construction •  All metal surfaces in contact with product are 316 stainless steel • Seals are silicone (internal inlet / outlet connection seal to housing is PTFE, Teflon polymer) Surface Finish • Mechanical polish (MP) – All housing stainless steel wetted parts are mechanically polished: Ra <0.8 µm (<32 microinches)

20 2020 - 2021 Gusmer Enterprises, Inc. Distilling Products Catalog

Powered by